Safety Section
-9-
Parking brake
Pull the lever BACK to engage the
parking brake.
Push the lever FORWARD to release
the parking brake.
Applying the parking brake puts the transmission in
NEUTRAL. The parking brake must be applied
when leaving the lift truck and when starting the
engine. If the operator leaves the seat without
applying the parking brake, an audible alarm will
sound.
WARNING
When leaving machine apply parking brake!
Parking brake is not automatically applied.
Alarm will sound if parking brake is not applied.
WARNING
Correct adjustment is necessary to provide
adequate braking. See the MAINTENANCE
section for adjustment procedures. The lift
truck may creep at engine idle and can cause
damage, injury or death. Always apply the
parking brake when leaving the lift truck. The
parking brake is NOT automatically applied.
To Next Page
Loading...
