OP000509
4-5
Inspection, Maintenance and Adjustment
Service Position
BEFORE beginning service work the machine must be
parked on level ground and positioned as shown below.
AFTER completing the service, all guards must be installed
and all engine covers must be closed and locked.
5
3
2
4
8
7
6
1
FG008055
Figure 3
Reference
Number
Description
1 The bucket/attachment must be resting on the ground.
2 Apply the parking brake.
3 Shut down engine and take out the ignition key. (Does not apply when checking oil
level in transmission).
4 Carefully release the pressure in pressure lines and pressure vessels to avoid risks.
5 Attach a black and yellow "Warning Tag" to the steering wheel.
6 Connect the frame joint lock.
7 Block the wheels in a suitable way (with, for example, wedges).
8 Allow the machine to cool.
To Next Page
