OP000507
2-15
Operating Controls
112. Hazard Warning Light Switch
This warning light is used when the equipment is
stopped due to a malfunction or when an emergency
occurs. When this switch is pressed the directional
indicator lights in front and back of the machine light
up and flash, warning others in the area. At the same
time the directional indicator lights on the instrument
panel will turn "ON" to warn the operator. The hazard
warning lights operate independent of the starter
switch.
O. In this position, this switch turns "OFF" hazard
warning lights.
I. In this position, this switch turns "ON" all turn
signals and they flash simultaneously.
NOTE: Hazard warning lights will function with starter
switch in "OFF" position.
2665C
O
I
Figure 23
To Next Page
