Using Other Applications 129
To install MIDlets from a PC
You can install the MIDlets/MIDlet suites on your device from a PC using the USB sync
cable, infrared, or Bluetooth. MIDlets copied to your device are automatically saved in the My
Documents folder. However, you can copy the MIDlet file(s) from a PC to any of the following
temporary folders on your device from where MIDlet Manager can install them.
• Device memory: ../My Device/My Documents/My MIDlets
• Storage card: ../My Device/Storage Card
Note If the My MIDlets folder does not exist in My Documents, you can create one with the same
folder name. However, a folder named Storage Card automatically appears after you insert a
storage card into your device.
To install a MIDlet/MIDlet suite
1. Tap Start > Programs > MIDlet Manager > Menu > Install > Local.
2. From the list, tap the MIDlet/MIDlet suite that you want to install.
3. Confirm to complete the installation.
Note To remove a MIDlet file from the temporary folder, tap and hold the file then tap Delete from the
shortcut menu.
To run MIDlets on your device
1. Tap Start > Programs > MIDlet Manager.
2. Tap a MIDlet to run.
To view the MIDlets currently running
• Tap the down arrow on the top left of the MIDlet Manager screen, then tap Running.
Note To view the most recently used MIDlets, tap Show > Recent.
To stop running a MIDlet
1. Tap the down arrow on the top left of the MIDlet Manager screen, then tap Running.
2. Tap and hold a MIDlet on the Running MIDlets screen, and tap Stop.
Note
To stop all MIDlets currently running on your device, tap Menu > Stop All.
To Next Page
Loading...