Experiencing Multimedia 105
• View in Windows Media. In Video capture mode, tap to switch to Windows Media
Player to play back the new video you just recorded.
• Assign to Contacts. Tap to associate the photo to a selected contact.
To access the Review screen
1. On the Camera Settings screen, tap Tools > Options > General tab.
2. Select the Review after capture check box. Please note that this check box is
selected by default to allow you to review the image or video clip after it has been
captured.
Use zooming
While capturing a still image or a video clip by using the camera, you can zoom in to make
the object in focus move closer, and you can zoom out to make the object move farther
away. In all capture modes, use NAVIGATION on your device, or tap the triangular Up arrow
next to the Zoom Ratio indicator, to zoom in a still image or an incoming video stream. When
the zooming limit is reached, you will hear a beep. To zoom out, press NAVIGATION down,
or tap the Down arrow. The camera zoom range for a picture or a video clip depends on the
capture mode and capture size. Following is a summary.
Capture mode Capture size setting Zoom range
Photo
2M (1600 x 1200) No zooming available
1.3M (1280 x 1024) 1.0x to 2.0x
Large (640 x 480) 1.0x to 2.0x
Medium (320 x 240) 1.0x to 4.0x
Small (160 x 120) 1.0x to 10.0x
Video and MMS Video
Medium (176 x 144) 1.0x to 2.0x
Small (128 x 96) 1.0x to 2.0x
Contacts Picture
Large (640 x 480) 1.0x to 2.0x
Medium (320 x 240) 1.0x to 4.0x
Small (160 x 120) 1.0x to 10.0x
Picture Theme
Determined by the current
template
Depends on the size of the
template currently loaded
To Next Page
Loading...