30 Entering and Searching Information
3. Write your text on the screen.
4. When finished, tap OK to return to the note list.
Notes To select handwritten text, tap and hold next to the writing. As soon as dots appear, and before
they form a complete circle, quickly drag across the writing.
If a letter crosses three ruled lines, it is treated as a drawing rather than text.
To draw in a note
1. Tap Start > Programs > Notes.
2. In the note list, tap New.
3. To draw on the screen, use the stylus like a pen.
4. A selection box appears around your drawing.
5. When finished, tap OK to return to the note list.
Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you
lift the stylus, the drawing is selected.
2.8 Recording a Note
You can create a stand-alone recording (voice note) or you can add a recording to a note.
For more information about creating, changing, or saving notes, see “Notes” in Chapter 7.
To create a voice note
1. Tap Start > Programs > Notes.
2. Do one of the following:
• To create a stand-alone recording, record from the note list.
• To add a recording to a note, create or open a note.
3. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar.
4. Tap the Record icon (
) to begin recording.
5. Hold your device’s microphone near your mouth or other source of sound.
6. Tap the Stop icon ( ) when finished recording.
7. If you are adding a recording to a note, tap OK to return to the note list when finished.
To Next Page
Loading...