DORMA PORTEO
WN 057472 45532 02/08
Standard commissioning
Requirements
·
·
·
·
·
The has been installed.
The door can easily be moved by hand.
Perform the following steps of the one after the other.
The (visual) acknowledgement is made via the light indicator (LED).
You can stop and restart this procedure at any time by simply switching off the system.
PORTEO door assistant
standard commissioning
The stored settings can be "overwritten" by a new commissioning procedure.
The “approach” describes the commissioning of the standard system.
Accessories like for example electric strikes or sensors are adjusted following the successful
commissioning of the system.
Standard commisioning
Set power switch to .
Set program switch to position
(central position).
"0FF"
"0"
2
0
I
II
Close door.
Connect power plug.
1
0FF
ON
0N
0FF
GB 14
To Next Page
Loading...
