Dover markem-imaje SmartDate 5 - Page 166

SECTION 5 - TROUBLESHOOTING
5-20
SmartDate 5 06/08
Warning Message 2300 - Printer High Temperature
Possible
Causes
The printer temperature is reaching an unacceptable level.
Remedial
Action
Turn off the power to the SmartDate 5 and allow the printer to
cool down.
Warning Message 2301 - Controller High Temperature
Possible
Causes
The controller temperature is reaching an unacceptable level.
Remedial
Action
Turn off the power to the SmartDate 5 and allow the controller
to cool down.
Warning Message 2302 - Printhead Under Temperature
Possible
Causes
The printhead temperature has not yet reached an acceptable
working level.
Remedial
Action
The SmartDate 5 will automatically initiate a pre-heat cycle
before printing can commence.
Table 5– 2: Warning Messages