SECTION 5 - TROUBLESHOOTING
5-41
SmartDate 5 06/08
5.16.1 Recovery Using CoLOS Create Pro
Job Files
The Markem.Imaje CoLOS Create Pro image design software can be used
transfer your Job files to the selected SmartDate 5. Back up copies of your images
can be kept in CoLOS Create Pro. See your CoLOS Create Pro Help files for
details on how to download Jobs.
Settings Files
CoLOS Create Pro does not support the uploading / downloading of printer
settings files. Settings files are created using Markem.Imaje CoLOS Control
software. The Markem.Imaje service engineer should, if requested, leave you with
a copy of the settings file for the particular application. This file can also be printed
out as a reference. You may use this to check the settings on the SmartDate 5
controller.
To Next Page
Loading...