SmartDate 5 06/08
TABLE OF CONTENTS
3 Maintenance 3-1
3.1 Introduction 3-1
3.2 Cleaning and Care 3-2
3.3 Maintenance Scheme 3-3
3.3.1 Quick/Regular Checks 3-3
3.3.2 Monthly Checks 3-4
3.4 Care of the Printhead 3-5
3.5 Cleaning the Printhead 3-6
3.6 Replacing the Printhead 3-7
3.6.1 Removing the damaged printhead 3-7
3.6.2 Setting the correct Printhead voltage 3-9
3.7 Replacing the Peel Roller 3-11
3.8 Replacing the Ribbon Guide Rollers 3-13
3.9 Replacing the Ribbon Movement Roller 3-14
3.9.1 Replacing the Roller Magnet 3-14
3.9.2 Replacing the Movement Roller 3-15
3.9.3 Replacing the Ribbon Movement Sensor 3-16
3.10 Replacing the Ribbon Tension Roller 3-17
3.11 Replacing the Ribbon Tension Sensor 3-18
3.12 Replacing the Micro Switches 3-19
3.13 Replacing the Solenoid Valves 3-20
3.14 Replacing the Drive Belts 3-21
3.14.1 Replacing the Drive Belt - Combined Printer 3-21
3.15 Replacing the Drive Belt - Shuttle Printer 3-23
3.16 Changing the Printer Hand - Combined Printer 3-27
3.17 Changing the Printer Hand - Shuttle Printer 3-30
3.18 Changing the Cassette Hand 3-33
3.19 Replacing the Printer PCBs 3-34
3.20 Replacing the Controller PCB 3-37
To Next Page
Loading...