06/08 SmartDate 5
TABLE OF CONTENTS
4 Technical Information 4-1
4.1 Introduction 4-1
4.2 The SmartDate 5 Printers 4-2
4.3 Printer Components 4-3
4.3.1 Linear Slides 4-5
4.3.2 Intermittent Drive System - SmartDate 5 Printer 4-8
4.3.3 Continuous Drive System - SmartDate 5 Printer 4-9
4.3.4 Continuous Drive System - SmartDate 5s Shuttle Printer 4-10
4.3.5 Ribbon Drive System 4-12
4.4 Printhead Module 4-13
4.4.1 Print Module Components 4-14
4.4.2 Printhead Module Operation 4-15
4.5 Printhead Assembly 4-16
4.5.1 Printhead Type Detection 4-17
4.5.2 Printhead Temperature Control 4-17
4.5.3 Printhead Voltage Control 4-17
4.6 Printer Orientation 4-18
4.6.1 Orientation - SmartDate 5 Printer 4-20
4.6.2 Orientation - SmartDate 5s Shuttle Printer 4-23
4.7 Printer Calibration 4-25
4.7.1 Print Module / Shuttle Carriage Calibration 4-27
4.7.2 Ribbon Calibration 4-30
4.7.3 Printer Cassette 4-32
4.7.4 Cassette Components 4-33
4.7.5 Ribbon Calibration / Movement Roller 4-35
4.7.6 Ribbon Tension Roller 4-36
To Next Page
Loading...