Dr.coffee F10 - Drip Tray Is Full up; Coffee Thermo-Block Over-Heated; Steam Thermo-Block Heating Overtime

Rev 0.0
Dr.coffee 产品维修手册 30
Showing on the Screen Cause Solutions
Drip
Tray
Is
Not
In
Plac
e
a) Not well fixed;
b) Sensor broken ;
c) Magnet loosing or broken;
 Replace the drip tray;
 Replace new sensor;
 Replace new magnet;
8.1.5 Drip tray is full up
Showing on the Screen Cause Solutions
Drip
tray
is
full
up
a) The waste water in the tray is full;
b) Sensor is dirty;
 Pull out and empty the tray;
 Check and clean up the sensor;
8.1.6 Coffee Thermo-Block Over-heated
Showing on the Screen
Cause
Solutions
Coff
ee
Ther
mo-
Bloc
k
Over
-
hea
ted
a) Temperature is over 160℃;
 Wait, as the tips in t
he Screen “The hot
water thermos-
block is cooling down,
please wait ...”;
 While the thermos-
block is cooling down,
no beverage could be made.
8.1.7 Steam Thermo-Block Heating Overtime