Dräger Narkomed 2C - Page 214

SOFTWARE UPDATE PROCEDURE (continued) NM2C
-- On the ORDM, press ESC to return to the SST Main Menu. (Use F10 on
the external PC.)
7.6.3 Display UUT Configuration
-- The Display Unit Under Test (UUT) Configuration screen (Figure 7-6)
shows the last service date, machine hours, and the software version
number for each of the machine items listed.
-- At the SST Main Menu, move the cursor to DISPLAY UUT
CONFIGURATION and press ENTER.
-- On the ORDM, press ESC to return to the SST Main Menu. (Use F10 on
the external PC.)
MACHINE ID: NM2C
SERIAL NUMBER: 00011066
SV50104
SOFTWARE VERSION: 1.20
SYSTEM FEATURES: 0003
LAST SERVICE DATE
HOURS RUNNING SINCE LAST SERVICE
TOTAL MACHINE RUN HOURS
SERIAL NUMBER
SYSTEM SOFTWARE VERSION
F10 PREVIOUS MENU
: 17:DEC:95
: 0470.3
: 0485.7
: 00011066
: 1.20
Figure 7-6: DISPLAY UUT CONFIGURATION SCREEN
Rev. G
7-10
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS