NM2C SOFTWARE UPDATE PROCEDURE (continued)
7.6.8 Secondary Service Screen
This screen allows access to the functions shown in Figure 7-11.
WARNING: These functions should only be accessed by a North
American Dräger qualified Technical Service
Representative. Improper access to certain functionsmay
cause important service data to be lost.
-- At the Primary Service Menu (described earlier) select the SERV access
level and enter your ID.
-- Press ALT H on the ORDM keyboard, then type in 256to display the
secondary service screen.
MACHINE ID: NM2C
SERIAL NUMBER: 00011066
SV50123
SOFTWARE VERSION: 1.20
SYSTEM FEATURES: 0003
F10 PREVIOUS MENU
Clear Service Hours and Reset Date
Clear Total Hours Running
Display Product Features
Configure Vaporizers
Machine Options
Clear Service Log
Press arrow keys to change fields, return to perform action
Figure 7-11: SECONDARY SERVICE SCREEN
-- Press ESC on the ORDM (F10 on the external PC) to return to the
Primary Service Menu. If desired, press ESC (or F10) again to return to
the SST Main Menu.
Rev. G
7-15
RETURN TO CD-ROM TABLE OF CONTENTS
RETURN TO THIS MANUAL'S TABLE OF CONTENTS
To Next Page
Loading...
