Dragino LG01 LoRa - Advance Examples; Upstream: Get data from LoRa node and send to loT server; Set up hardware

www.dragino.com
LoRa Gateway User Manual ---Update:2017-02-21 31 / 44
8 Auto-Provisioning
9 Advance Examples
9.1 Upstream: Get data from LoRa node and send to IoT server
9.1.1 Set up hardware
Set up the hardware as below, the LoRa node will get sensor data from DHT11 and send these
data to LoRa Gateway, when the Gateway get the data, it will pass the data to the IoT server.
9.1.2 Set up IoT Server account
We choose ThingSpeak as the IoT server here, first sign up an account in ThingSpeak, then goto
the Channels and create a Channel with Temperature and Humidity field.
After create the channel, user can see the Channel ID and API key in the Channel Page. They are
needed for upgrade data to this channel.