www.dragino.com
LoRa Gateway User Manual ---Update:2017-02-21 32 / 44
9.1.3 Upload sketches
Step 1: Download the ThingSpeak Library and put it in the Arduino library directory.
Step 2: Select the example from:
IDE --> File --> Examples --> Dragino --> IoTServer --> ThingSpeak --> dht11_client
And upload this sketch to the LoRa Node
Step 3: Select the example from
IDE --> File --> Examples --> Dragino --> IoTServer --> ThingSpeak --> dht11_server
Replace the myChannelNumber & myWriteAPIKey to your info
And upload this sketch to the LoRa Gateway.
9.1.4 Check Result
Check Result in ThingSpeak as below
To Next Page
Loading...
