Dragino LG01 LoRa - Downstream: Get data from IoT Server and send to LoRa node; Set up Hardware; Set up talkback command

www.dragino.com
LoRa Gateway User Manual ---Update:2017-02-21 33 / 44
9.2 Downstream: Get data from IoT Server and send to LoRa node
9.2.1 Set up Hardware
Set up the hardware as below, the LoRa Gateway will get command from IoT Server and then
send the command to LoRa node, the node control the relay state according to the receive
command.
9.2.2 Set up talkback command
Create a talkback command in ThingSpeak Apps. We can then find the talkback ID and talkback
API key here: