Draytek Vigor2960 series User Manual

Vigor2960 Series User’s Guide
114
4
4
.
.
2
2
.
.
4
4
B
B
i
i
n
n
d
d
I
I
P
P
t
t
o
o
M
M
A
A
C
C
This function is used to bind the IP and MAC address in LAN to have a strengthen control in
network. When this function is enabled, all the assigned IP and MAC address binding
together cannot be changed. If you modified the binding IP or MAC address, it might cause
you not access into the Internet.
This page allows you to configure related settings for the function of Bind IP to MAC.
Each item will be explained as follows:
Item Description
ARP Table
This table is the LAN ARP table of this router. The
information for IP and MAC will be displayed in this field.
Each pair of IP and MAC address listed in ARP table can
be selected and added to IP Bind List by clicking Move on
IP Bind List
.
Mode -
 Enable - Choose it to invoke this function.
However, IP/MAC which is not listed in IP Bind
List also can connect to Internet.
 Disable - Choose it to disable this function. All
the settings on this page will be invalid.
 Strict Bind – Choose it to lock the connection
of the IP/MAC which is not listed in IP Bind
List.
Select All - Allow you to choose all the items listed in ARP
Table.
Move -Move the selected item to IP Bind List.
Refresh - It is used to refresh the ARP table. When there is
one new PC added to the LAN, you can click this link to
obtain the newly ARP table information.
Apply – Click it to save the setting.
IP Address - Display the IP address of one device.

Draytek Vigor2960 series Specifications

General

Brand	Draytek
Model	Vigor2960 series
Category	Firewall
Language	English