Vigor2960 Series User’s Guide
116
Strict_Bind – Only specified IP addresses will be assigned to the device with
bind MAC address. Other devices which are not listed on the Bind Table shall
still NOT get the IP address from DHCP server.
3. Click Add to open
4. The following dialog appears.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the profile.
IP Address
Type the IP address that will be used for the specified MAC
address.
MAC
Type the MAC address that is used to bind with the assigned
IP address.
Comment
Type a brief description for such profile.
Apply
Click it to save and exit the dialog.
Cancel
Click it to exit the dialog without saving anything.
5. Enter all of the settings and click Apply.
To Next Page
Loading...
Need help?
General
