Draytek Vigor2960 series User Manual

Vigor2960 Series User’s Guide
134
Each type will bring different settings for configuration.
When Subnet is selected as Source Type
 IP Address - Type an IP address here as the
source IP address for such rule.
 Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the source.
When Object is selected as Source Type
 IP Object – Use the drop down list to choose the
source IP object(s) for such rule profile.
 IP Group –Use the drop down list to choose the
source IP group(s) for such rule profile.
Destination Type - Choose the address type (Subnet or
Object) for such rule.
Each type will bring different settings for configuration.
When Subnet is selected as Destination Type
 IP Address - Type an IP address here as the
destination IP address for such rule.
 Subnet Mask - Use the drop down list on the right
to choose a suitable mask for the destination.
When Object is selected as Destination Type
 IP Object – Use the drop down list to choose the
destination IP object(s) for such rule profile.
 IP Group –Use the drop down list to choose the
destination IP group(s) for such rule profile.
 DNS Object - Use the drop down list to choose
DNS object(s) for such rule profile.
When Country is selected as Destination Type
Destination
 Country Object - Use the drop down list to
choose the country object(s) for such rule profile.
Route Rule
Out-going Rule - It determines the way (interface) that the
incoming traffic will be forwarded to.

Draytek Vigor2960 series Specifications

General

Brand	Draytek
Model	Vigor2960 series
Category	Firewall
Language	English