Vigor2960 Series User’s Guide
178
8. The following page for configuration will appear.
Available parameters are listed as follows:
Item Description
Profile
Type the name of the IP filter rule.
Enable
Check the box to enable this profile.
Action
The action to be taken when packets match the rule.
Block - Packets matching the rule will be dropped
immediately
Accept- Packets matching the rule will be passed
immediately.
Block If No Further Match - A packet matching the rule,
and that does not match further rules, will be dropped.
Accept If No Further Match - A packet matching the rule,
and that does not match further rules, will be passed through.
Next Group
When you choose Block If No Further Match or Accept If
No Further Match as Block Action, you have to specify
next IP filter group for further matching.
Syslog
Click Enable to make the history of firewall actions
To Next Page
