Vigor2960 Series User’s Guide
251
System User
Only the user profile with privilege level has the right to
operate the function of the router as the administrator of
the router.
False – Choose it to disable the function of System User.
Such user profile does not have the right to operate the
router’s function.
True – Choose it to enable the function of System User.
Privilege Level – If true is selected for System User,
you have to specify the privilege level
(User/Operator/Admin) for such profile.
Admin has the greatest authority for router operation;
User has the smallest authority for router operation.
PPTP/L2TP/SSL/PPPoE Server General Setup
Idle Timeout (sec)
If the user is idle over the limitation of the timer, the
network connection will be stopped for such user. By
default, the Idle Timeout is set to 300 seconds.
DHCP from
Choose a LAN profile for DHCP server IP dispatching.
Remote clients using this profile to do PPTP/L2TP
dial-in will be assigned IP addresses according to this
DHCP pool.
Static IP Address
Type an IP address for such user profile which accesses
Internet with PPTP/L2TP connection.
User Management
Allow Web Portal Login
Enable – Click it to enable web portal login with such
profile.
Disable – Click it to disable the option.
Time Quota
Enable – Click it to enable time quota function.
Set Time Quota (min) – Type the time value.
Remaining Time – Display the remaining time for
the user profile.
Disable – Click it to disable the function.
Note: The range of Time Quota is 1~14400 minutes.
Max Simultaneous
Login
It means the maximum online number of clients logging
with this profile.
The range is from 1 to 255. -1 means not limit; 0 means
No access.
PPTP/L2TP/SSL Server
PPTP Dial-in / L2TP
Dial-in / SSL Tunnel
Click Enable to make network connection through
PPTP/L2TP/SSL Tunnel protocol for users who access
into Internet via such profile.
To Next Page
Loading...
