Draytek Vigor2960 series - 4.7.2.2 Apply All User Profile Settings

Vigor2960 Series User’s Guide
253
Current Traffic Used
(MB)
Display the cumulative amount of data traffic that the
user used.
Reset - Click it to reset the setting to default value (0).
MAC Binding
Specify a MAC address which is limited and used for
such PPPoE account.
Enable – Click it to enable the function.
 MAC Address – If MAC Binding is enabled, simply
type the MAC address of the router in this field.
FTP User Setting
Allow FTP Server Login
Click Enable to allow the remote user accessing into
Internet via FTP server.
Radius User Setting
Allow Radius Server
Login
Click Enable to allow the remote user accessing into
Internet via Radius server.
Apply
Click it to save the configuration.
Cancel
Click it to exit the dialog without saving the
configuration.
4. Enter all of the settings and click Apply.
5. A new User Profile has been created. Below shows an example of user profile.