Vigor2960 Series User’s Guide
318
4
4
.
.
9
9
.
.
4
4
.
.
3
3
S
S
S
S
L
L
V
V
P
P
N
N
This page display current status for VPN tunnel built with SSL protocol.
Available parameters are listed as follows:
Item Description
User Authentication
Type
Set user authentication to Local server or RADIUS server.
LDAP profiles
Choose a LDAP profile for PPTP Server if LDAP is selected
as user authentication type.
To clear the selected one, click
to remove current object
selections.
DHCP from
Choose a LAN profile for L2TP Server if RADIUS is
selected as user authentication type.
DHCP Relay
Enable - Let the router assign IP address to every host in the
LAN.
Disable - Let you manually assign IP address to every host in
the LAN.
DHCP Server Location
It is available when DHCP Relay is enabled.
Choose the WAN/LAN interface for the DHCP server.
DHCP Server IP
Address
It is available when DHCP Relay is enabled. Set the IP
address of the DHCP server you are going to use so the relay
agent can help to forward the DHCP request to the DHCP
server.
SSL VPN MSS
Type the maximum segment size (MSS) for SSL VPN tunnel.
Apply
Click it to save the configuration.
Cancel
Click it to discard the settings configured in this page.
Enter all of the settings and click Apply.
To Next Page
Loading...
Need help?
General
