Vigor2960 Series User’s Guide
74
If you choose DHCP IA NA as IPv6 protocol type, click the DHCPV6 Tab to open
the following page:
Available parameters are listed as follows:
Item Description
DHCP (IA_NA)
Gateway Address
Type the gateway IP address for IPv6 DHCP IA_NA mode.
DHCP (IA_NA)
DNS Address
Add – Click this button to type primary DNS server address
for IPv6.
Save – Click this button to save the setting.
Apply
Click it to save the configuration and exit the dialog.
Cancel
Click it to exit the dialog without saving the configuration.
If you choose DHCP IA PD as IPv6 protocol type
It is not necessary for you to configure any web page.
5. After finished the settings configuration, click Apply to save and apply the settings.
To Next Page
Loading...
Need help?
General
