Vigor2960 Series User’s Guide
85
address.
Save – Click it to save the settings.
Host –Type the name (URL) of the mail server.
Mail Server – Type the name (URL) of the mail server.
IP Address – Type the IP address of the mail server.
Preference – Set a number for the priority of such mail
server.
Additional A
Record
It is used to record the DNS query by IPv4 address.
Add –Click it to add a new host with specified IP address.
Save – Click it to save the settings.
Host –Set a domain name.
IP Address – Type the IP address of the mail server.
AAAA Record
It is used to record the DNS query by IPv6 address.
Add –Click it to add a new host with specified IPv6 address.
Save – Click it to save the settings.
Host – Set a domain name.
IPv6 Address –Type the IPv6 address of the host.
Any query concerning of Host will be forwarded to the server
selected in Reference for advanced process.
CNAME Record
It is used to record the DNS query for CNAME.
Add – Click it to add a new host with specified reference.
Save – Click it to save the settings.
Host – Set a domain name.
Reference – Choose a sub domain name from the drop down
list.
Any query concerning of Host will be forwarded to the server
selected in Reference for advanced process.
4. Click Apply. A new profile will be added on the page.
You can create sub-domain by clicking
on the left side of the selected inbound load
balance profile. A sub-domain setting page will appear for you to add new profile.
Note that the configuration is similar to the way stated on the above steps.
To Next Page
Loading...
Need help?
General
