Draytek VigorAP 910C User Manual

VigorAP 910C User’s Guide
82
Available settings are explained as follows:
Item Description
SSID
Display the SSID name of the access point.
BSSID
Display the BSSID (MAC Address) of the access point.
RSSI
Display the signal strength of the access point. RSSI is the
abbreviation of Receive Signal Strength Indication.
Ch. (Channel)
Display the channel number of the access point.
Auth.
(Authentication)
Display the authentication type of the access point.
Encrypt (Encryption)
Display the encryption setting of the access points. If you have
selected the access point with security setting, you have to go
to 2-7 Wireless Security to set the same security with the
access point you want to associate.
Ver. (Version)
Display the version of WPS.
Status
Display the status of WPS access point.
Refresh
Click this button to refresh the AP site survey.
Start PBC
Click Start PBC to make a WPS connection within 2 minutes.
Start PIN
When using PinCode method, it is required to enter PIN Code
(Personal Identification Number Code, 8-digit numbers) into
Registrar. When the wireless station is Enrollee, the users can
use Renew PIN to re-generate a new PIN code.
Renew PIN
Click this button to re-generate a new PIN code.

Draytek VigorAP 910C Specifications

General

Brand	Draytek
Model	VigorAP 910C
Category	Wireless Access Point
Language	English