DriSteem Vapor-logic 4 User Manual

%3*45&&.7BQPSMPHJD*OTUBMMBUJPOBOE0QFSBUJPO.BOVBMt1BHF
0QUJPOTBOEGFBUVSFT
Operation
Setting date and time
The Vapor-logic4 controller contains a real-time clock that is
used for several features including the drain and flush sequence
and alarm logging. If you need to reset the date or time, go to the
Setup menu. The date and time will need to be reset whenever
the Vapor-logic4 controller has been powered off for more than
72 hours, such as when starting up at the beginning of the
humidification season.
Note: Verify the date and time settings after every firmware
upgrade.
Battery backup, nonvolatile memory
If there is a power outage, date and time settings will be saved for
72 hours. Alarms, unit configuration, and usage timers will remain
in nonvolatile memory indefinitely.
Security/password
To control who can change Vapor-logic4 settings, enable the
security function and define a password in the Setup menu. Enter
four digits, numbers only, and define the time-out period (minutes
of inactivity before Vapor-logic4 reverts to read-only mode). The
Web interface and the keypad/display can have separate passwords.
Important: Write down the password and keep in a secure location.

DriSteem Vapor-logic 4 Specifications

General

Brand	DriSteem
Model	Vapor-logic 4
Category	Controller
Language	English