DriSteem Vapor-logic 4 User Manual

1BHFt%3*45&&.7BQPSMPHJD*OTUBMMBUJPOBOE0QFSBUJPO.BOVBM
0QUJPOTBOEGFBUVSFT
Downloading historical data
Vapor-logic4 acquires data at one-minute intervals and retains
it for seven rolling days. These data, available for download and
sorting, contain the details shown in Table 64-1.
Go to the Download data section of the Diagnostic screen for
download options.
Table 64-1:
Sample of data log downloaded and sorted
Time
SpaceRH or
Demand
Aux Temp
(degF)
Tank Temp
(degF) BTU’s used
Lbs
steam
Output
(pcnt) Alarm/Msg Alarm/Msg Status
Current Config:
XX##XX#X###XX
Factory Config:
XX##XX#X###XX
1/26/10 9:36 AM 23 0 212 567019018 421066 23
——
1/26/10 9:37 AM 23 0 212 567021350 421068 23
1/26/10 9:38 AM 23 0 211 567023681 421070 23
1/26/10 9:39 AM
LOW WATER
CUTOUT
Auto cleared message
1/26/10 9:40 AM 23 0 210 567028344 421073 23
1/26/10 9:41 AM 23 0 211 567030677 421075 23
1/26/10 9:42 AM 23 0 212 567033008 421077 23
1/26/10 9:43 AM 23 0 212 567035339 421079 23
1/26/10 9:44 AM Unit Start Auto cleared message
To sort data (as shown above) with alarms and messages listed in
the order they occurred:
1. Import the data into a spreadsheet program, such as Microsoft
Excel.
2. Set the Time column to be displayed in the date-time format.
3. Sort all rows by “Time” in ascending order.
Backing up and restoring data
Vapor-logic4 data can be backed up to and restored from a USB
flash drive. The backup file contains all information relative to the
humidifier, including firmware, user settings, model number, serial
number, and the configuration string.
Backup files use the serial number in the backup file name so that
the file is easily matched to a particular humidifier.
Operation
Note: Data is saved to nonvolatile memory every
60 minutes. If unit power is lost, up to 60
minutes of data could be lost.

DriSteem Vapor-logic 4 Specifications

General

Brand	DriSteem
Model	Vapor-logic 4
Category	Controller
Language	English