08
177
In the event of a breakdown
Changing a fuse
Before changing a fuse:
F
identify the cause of the failure and correct
it,
F all electrical consumers must be switched
off,
F immobilise the vehicle and switch off the
ignition,
F
identify the defective fuse using the current
allocation tables and diagrams.
To replace a fuse, you must:
F use the special tweezers to extract the fuse
from its housing and check the condition of
its filament.
The fuse allocation tables and the
corresponding diagrams are available
from a
dealer or from a qualified
workshop.
The replacement of a
fuse not shown in
the allocation tables may cause a
serious
malfunction of your vehicle. Contact
a dealer or a qualified workshop.
Good Failed
Tweezers
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard or
optional equipment.
Before installing other electrical
equipment or accessories on your vehicle,
contact a
dealer or a qualified workshop.
F
Open the glove box.
F
Press on the centre handle of the fusebox
cover.
F Lower the cover completely.
F
Take the tweezers from their housing.
F
always replace the failed fuse with a fuse
of the same rating (same colour); use of
a different rating may cause malfunctions
(risk of fire).
If the fault recurs after replacing a fuse, have
the electrical system checked by a
dealer or by
a
qualified workshop.
The Manufacturer accepts no responsibility
for the cost incurred in repairing your
vehicle or for rectifying malfunctions
resulting from the installation of accessories
not supplied and not recommended
and not installed in accordance with
specifications, in particular when the
combined power consumption of all of the
additional equipment connected exceeds
10
milliamperes.
To Next Page
Loading...
Need help?
General
