DS Automobiles DS 3 CROSSBACK User Manual

91
05
Safety
The mountings comprise three rings for each
seat, indicated by a
marking:
-
two rings A located between the vehicle
seat backrest and cushion,
This system prevents the child seat from tipping
forward in the event of a
front impact.
This ISOFIX mounting system ensures fast,
reliable and safe fitting of the child seat in your
vehicle.
F
Secure the upper strap hook to ring B.
F
Tighten the upper strap.
When fitting an ISOFIX child seat to the
left-hand rear seat of the bench seat,
before fitting the seat, first move the
centre rear seat belt towards the middle
of the vehicle, so as to avoid the seat
interfering with the operation of the seat
belt.
An incorrectly installed child seat
compromises the child's safety in the
event of an accident.
Strictly observe the fitting instructions
provided in the user guide supplied with
the child seat.
For information about the installation
possibilities for ISOFIX child seats in your
vehicle, refer to the summary table.
"ISOFIX" mountings
The seats shown below are fitted with ISOFIX
compliant mountings:
The 2
latches of ISOFIX child seats are
secured to them.
- one ring B located behind the seat, called
the TOP TETHER, for fixing seats fitted with
an upper strap.
Front seat
Rear seats
To secure the child seat to the TOP TETHER:
F Remove and stow the head restraint before
installing the child seat on the seat (refit it
once the child seat has been removed).
F Pass the upper strap of the child seat
behind the seat backrest, between the head
restraint rods.

DS Automobiles DS 3 CROSSBACK Specifications

General

Brand	DS Automobiles
Model	DS 3 CROSSBACK
Category	Automobile
Language	English