92
05
Safety
Recommended ISOFIX child seats
Also consult the user guide from the child
seat's manufacturer to find out how to
install and remove the seat.
Locations for ISOFIX child seats
In line with European regulations, this table
indicates the options for installing ISOFIX child
seats on the vehicle seats fitted with ISOFIX
mountings.
In the case of universal and semi-universal
ISOFIX child seats, the ISOFIX size category,
determined by a letter from A to G, is indicated
on the child seat next to the ISOFIX logo.
"RÖMER Baby-Safe Plus and its ISOFIX base"
(size category: E)
Group 0+: from birth to 13 kg
Installed "rearward facing" using an ISOFIX
base which is attached to rings A.
The base has a support leg, height-
adjustable, which rests on the vehicle's floor.
This child seat can also be secured with
a
seat belt. In this case only the seat body is
used and is attached to the vehicle's seat by
the three-point seat belt.
"RÖMER Duo Plus ISOFIX"
(size category: B1)
Group 1: from 9
to 18 kg
Installed only in the "forward facing" position.
Attached to rings A and ring B, referred to as
TOP TETHER, using an upper strap.
Three seat body angles: sitting, reclining,
lying down.
This child seat can also be used on seats
not equipped with ISOFIX mountings. In this
case, it must be secured to the vehicle seat
using the three-point seat belt. Adjust the
front seat of the vehicle so that the child's feet
do not touch the backrest.
To Next Page
Loading...
Need help?
General
