EasyManua.ls Logo

DSC PC5020 - Section 1: Introduction; About the Power864 System; About the Power864 Manual Set; Main Panel Specifications

DSC PC5020
66 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Section 1: Introduction
1.1 About the Power864 System
The Power864 security system supports up to 64 zones, 8 sepa-
rate partitions, and 32 users.
The PC5020 main board comes with 4 programmable outputs,
and you can add up to 12 more using PC5204 and PC5208
modules. You can program the outputs to control things such as
doorstrikes and lights, using 25 different output options. See
Programmable Outputs in Section 5.
You can program the Power864 using any system keypad, or
using DLS-3 downloading software and a computer. See How to
Program on Page 10.
1.2 About the Power864 Manual Set
Installer Manuals
Read the entire manual carefully before beginning your installation.
This manual describes:
An overview of the system (Section 1: “Introduction”)
How to install and wire the system and its modules (Section 2:
“Installation and Wiring”)
How to program the system (Section 3: “How to Program”)
An introduction to the user interface and keypad operation
(Section 4: “Keypad Commands”)
An overview of the main system programming sections (Sec-
tion 5: “Programming Sections”.
Be sure to record all your system programming in the Program-
ming Worksheets.
If you will be adding modules to your Power864 system, read the
Installation Instructions that come with each module.
User’s Guide
The User’s Guide provides easy to follow instructions for end
users. Installers should also review this manual, in order to prop-
erly instruct the end-users once the installation is complete.
1.3 Main Panel Specifications
System Overview:
8 fully programmable zones
39 access codes: 32 user, 1 system master, 2 supervisor codes,
2 duress, 1 maintenance and 1 installer Code
Expandable to 64 zones
Keypads with zone inputs available (PC5508Z, PC5516Z,
PC5532Z, LCD5500Z, and LCD5501Z)
Hardwired expansion available using the PC5108 Eight Zone
Expansion Module, the PC5100 Addressable 32 Zone Expan-
sion Module and the PC5700/5720 Fire Module
Wireless expansion available using the PC5132 Wireless 32
Zone Expansion Module (433 or 900MHz, Fully Supervised)
Normally closed, Single EOL, or Double EOL zone supervision
34 zone types, 8 Programmable zone options
Up to 8 partitions
Audible Alarm Output:
700mA supervised bell output (current limit 3 amps), 12 V
DC
Steady or pulsed output
EEPROM Memory:
Will not lose programming or system status on complete AC
and battery failure
Programmable Outputs:
Up to 14 programmable outputs, 21 programmable options
Three low current (50 mA) PGM outputs on main panel
(PGM1, PGM3, PGM4)
One high current (300 mA) PGM output with 2-wire smoke
detector capability on main panel (PGM 2)
Eight additional low current (50 mA) PGM outputs available
using the PC5208 module
Four high current (1 Amp) PGM outputs available using the
PC5204 module (1 PC5204 output, fully supervised for siren
output)
Powerful 1.5 Amp Regulated Power Supply:
550 mA auxiliary supply, 12 V
DC
Positive temperature coefficient (PTC) components replace fuses
Supervision for loss of AC power, low battery
Internal clock locked to AC power frequency
Power Requirements:
Transformer = 16.5 V
AC, 40VA permanently connected
Battery = 12 volt 4 Ah (min.) rechargeable sealed lead acid
Remote Keypad Specifications:
5 different keypads available:
- PC5508Z 8 zone LED keypad
- PC5516Z 16 zone LED keypad
- PC5532Z 32 zone LED keypad
- LCD5500Z programmable message LCD keypad
- LCD5501Z fixed message LCD keypad
- LCD5501Z32-900 fixed message LCD keypad with inte-
grated PC5132 wireless receiver
“Z” version keypads have one zone input
Each keypad has 5 fully programmable function keys
Connect up to 8 keypads
Four wire (Quad) connection to Keybus
Built in piezoelectric buzzer
Digital Communicator Specifications:
Supports all major formats including SIA, Contact ID, and Res-
idential Dial
Split reporting of selected transmissions to each telephone
number
3 programmable telephone numbers
1 system account number, plus 8 partition account numbers
Supports LINKS1000, GSM1000 cellular communication,
Links 2X50 Long Range Alarm Transmitter and Skyroute™
Cellemetry Communication Transceiver.
DTMF and pulse dialing
DPDT line seizure
Anti-jam feature
Event-initiated personal paging
System Supervision Features
The PC5020 continuously monitors a number of possible trouble
conditions including:
AC Power Failure
Trouble by Zone

Table of Contents

Other manuals for DSC PC5020

Related product manuals