Description Of Controls
70
5.3.8.2 DATA LOGGING PAGES
The DSE data logging pages show information depending on the configuration in the module.
Data Logging
Log to internal memory
Logging active
No USB drive present
Inserting a USB drive to the host USB will display the following change to the page.
Data Logging
Log to USB drive
Logging active
Do not remove USB drive
NOTE: Removal of the USB drive should only be carried out using the following method.
Press and hold the tick button until “Ok to remove USB drive” is displayed.
Data Logging
Log to USB drive
Logging active
Ok to remove USB drive
It is now safe to remove the USB drive.
This ensures the logging data file will save to memory complete and will not become corrupt.
Press down
to view the next page.
Data Logging
Time remaining
xxxx h xx m
Press down
to view the next page.
Data Logging
Memory remaining
xxxx
.
Location of stored data.
Internal module memory or external
If data logging is active or inactive
Remaining time available for logging
information.
xxxx hours xx minutes
Memory space remaining, this depends
what size memory drive is fitted (Max
16Gb) or allocated internal (2Mb)
memory left available.
To Next Page
Loading...
Need help?
General
