Need help?Do you have a question about the DSP TP400 PC and is the answer not in the manual?
General description of the TP400 PC/104-Plus board.
Key features and specifications of the TP400.
How the TP400 is compatible with standard PCs.
Using PC/104-Plus for system expansion.
Overview of the TP400's internal structure and components.
Initial steps and recommendations for operating the TP400.
Tips to prevent or resolve typical issues.
Details on the National Semiconductor Geode GX1 processor.
Information on clock frequencies and generation.
Main memory configuration and options.
On-board non-volatile memory for BIOS and storage.
Layout of the TP400's memory space.
Overview of I/O addressing and resources.
Configuration and operation of COM1-COM4 serial ports.
Graphics capabilities for CRT and TFT displays.
Universal Serial Bus connectivity.
Network interface details.
Overview of the TP400's firmware.
Configuration utility for system parameters.
How to use the BIOS setup menus.
Updating the BIOS and other firmware.
Using flash memory as a disk drive.
Thermal management for the CPU.
Installing and configuring memory modules.
Configuring board functions via solder links.
Overview of all connectors.
Pinouts for PC/104 and PC/104-Plus.
Pin assignments for the J4 connector.
To Next Page
General