DSP TP400 PC - Floppy Connector; Table E15 - J103 Floppy Connector Pin Assignments

E12 158004.B00
E.10 FLOPPY CONNECTOR
The floppy disk drive can be connected through a 26-way flat flexible cable, through
connector J103. Pin 26 of the J103 connector can be identified by a small "26" on the
top of the plastic molding of the connector.
PIN SIGNAL PIN SIGNAL
1 VCC 2 /INDEX
3 VCC 4 /DS0
5 VCC 6 /DSKCHG
7 N/C 8 N/C
9 N/C 10 /M0
11 N/C 12 /DIRC
13 N/C 14 /STEP
15 GND 16 /WD
17 GND 18 /WE
19 GND 20 /TK00
21 GND 22 /WPT
23 GND 24 /RDATA
25 GND 26 /HS
TABLE E15 - J103 FLOPPY CONNECTOR PIN ASSIGNMENTS