DSP TP400 PC - Appendix C: Mechanical Drawings and Schematics

158004.B00 C1
APPENDIX C: MECHANICAL DRAWINGS AND SCHEMATICS
The four component placement diagrams that follow may be of help in locating the
components referred to in Appendix B. There is one diagram for each side of the two
printer circuit boards that make up the TP400.
This Appendix includes mechanical drawings of the TP400, showing the position of
pin 1 of each connector.
The drawings are of the REV B00 version of the TP400. The mechanical details are
unchanged between the versions, with the exception that the PanelLink connector
moves very slightly.