22
Make sure not to overlap IP addresses used by another devices connected to the same network
or host PC.
NETIMPRESS air does not support DHCP. If you use ad hoc mode, IP address on the PC must
be a static IP address.
For example, if you set 192.168.0.1 as an IP address of NETIMPRESS air, please set
192.168.0.2 for IP address of PC.
<IP address setting of PC>
Select
Control Panel
–
Network and Sharing Center
, and then click
Change adapte
settings
.
WPA-PSK and WPA2-PSK are not available for the encryption mode when ad hoc mode is selected.
Right-click to open properties.
Click Change adapter
settings.
To Next Page