SLICE User’s Manual support@dtsweb.com
Version 1.0 - May 2010 16 ©DTS, Inc. - All Rights Reserved
2.4.2. 11.1 V Rechargeable Lithium-Polymer Batteries
! Available in 3 capacities: 2200, 4400, and 6600 mAh
2.5. SLICE Software
See Section 4.0 for detailed software information.
The SLICEWare software application allows for easy:
! Test set-up
! Sensor database management
! Real-time sensor check-out
! Test execution
! Data download and viewing
! Data export
A SLICE API (Application Programmers Interface) and LABView driver (fourth quarter
2010) are also available.
Please contact technical support (support@dtsweb.com
) for the latest update to your
software version.
3. Mounting and Connecting SLICE Hardware
This section gives details on how to connect your SLICE hardware. Choose the connection
method you have from the options below for the quickest information.
3.1. General Connection Guidelines
Great care should always be taken when connecting any power, switch, sensor or any
other device to the SLICE system.
! DO NOT exceed the rated voltage input range for the device. Whenever
possible use the power supply or battery pack supplied with your SLICE system.
To Next Page
Loading...