DTS SLICE NANO - Power (PWR) LED

To Next Page

To Previous Page

SLICE User’s Manual support@dtsweb.com

6.2. Power (PWR) LED

Action

Result

(not armed)

Power up

Connected to USB power Only

Connected to external power – power is OK

Connected to external power – power is low

The power LED is red, green or blue.

! At power up, the LED cycles from red to green to blue immediately after the

status LED has completed its boot-up sequence.

! When USB is connected, the LED will turn blue.

! With OK external power, the LED will turn green.

! With low external power, the LED will turn red.

! These transitions do not happen if the unit is armed.