Ducati HYPERMOTARD 939 - Immobilizer Code (PIN CODE)

Immobilizer code (PIN CODE)
This function makes it possible to temporarily turn on
the motorcycle if the Immobilizer system is not
working.
Note
The PIN CODE function must be activated by
the user by entering your 4-digit PIN in the instrument
panel, otherwise the motorcycle cannot be started
temporarily in the case of a malfunction.
To display the function, enter the "setting" menu and
access the "PIN" page by pressing button (4).
- If the PIN CODE has not yet been entered, the
PIN activation function (INSERT NEW PIN) will be
displayed.
- If the PIN CODE has been entered, the PIN
modification function (MODIFY PIN CODE) will
be displayed.
In order to temporarily start the motorcycle in case of
malfunction of the Immobilizer system, please refer
to the "PIN entering for vehicle releasepage 128"
function.
Warning
The motorcycle owner must activate (store) the
PIN code; if there is already a stored PIN, contact an
Authorised Ducati Dealer to have the function "reset".
To perform this procedure, the Authorised Ducati
Dealer may ask you to demonstrate that you are the
owner of the motorcycle.
102