Ducati HYPERMOTARD 939 - DEFAULT (Restoring the Default Parameters of a Single RIDING MODE)

DEFAULT (restoring the default
parameters of a single RIDING MODE)
This function allows restoring the parameters set by
Ducati for each single Riding Mode.
To display the function, enter the setting menu and
access the "R.MODE" page.
Then use buttons (1) and (2) to select the riding mode
whose default parameters must be reset and press
button (4). Use buttons (1) and (2) to select
"DEFAULT" and keep button (4) pressed for 3
seconds.
Now, instead of "DEFAULT", the indication "PLEASE
WAIT ..." will be displayed for 3 seconds to indicate
that the instrument panel is resetting the default
parameters of the selected Riding Mode.
After 3 seconds, "EXIT" will be automatically
highlighted; press button (4) to quit and go back to the
setting menu.
Note
When the current settings are the default ones,
on the "DEFAULT" indication right side the display
shows a symbol (a circle with a dot).
86