Trip meter 1
This function allows displaying the indication of the
partial distance travelled (km or miles according to the
specific application).
When this function is accessed and button (1) is kept
pressed for 3 seconds, trip meter will be reset. When
the reading exceeds 9999.9, distance travelled is
reset and the meter automatically starts again. If the
system measurement units are changed at any
moment, or if there is an interruption in the power
supply (Battery Off), the distance travelled is reset
and the count starts from zero (considering the newly
set unit of measurement).
Note
When this reading is reset, also "Average
Consumption", "Average Speed" and "Trip Time"
functions are reset.
Fig. 13
37
To Next Page