Instrument panel back-lighting setting
(B.LIGHT)
This function allows dashboard backlighting setting.
To display the function, enter the setting menu and
access the "B.LIGHT" page.
The information will be displayed as follows:
- checkmark (V) indicates the adjustment currently
in use;
- use buttons (1) and (2) to highlight the new
adjustment;
- to store the new adjustment, press button (4);
checkmark (V) will move on the stored condition.
To quit, select "EXIT" and press button (4).
1) HIGH setting: when storing this condition, the
backlighting is at maximum brightness.
2) MEDIUM setting: when storing this condition,
the backlighting is reduced by approximately
30% of maximum brightness.
3) LOW setting: when storing this condition, the
backlighting is reduced by approximately 50% of
maximum brightness.
Note
In the event of an interruption of the power
supply from the battery, when power is restored at
the next Key-On, the backlighting will always be set
by default to maximum brightness.
88
To Next Page
Loading...
