Average fuel consumption
This function indicates vehicle average fuel
consumption. The calculation is made considering
the quantity of fuel used and the distance travelled
since Trip 1 was last reset. When Trip 1 is reset, the
value is reset and the first value available is displayed
10 seconds after the reset. During the first 10
seconds, when the value is not yet available, the
display will show a string of dashes "- -.-". For the
Europe, Japan and China versions this information is
displayed in "L / 100" (litres / 100 Km); it is though
possible to set the unit of measurement "Km / L"
(kilometres / litre) by means of the "Setting special"
function. For the UK version this information is
displayed in "mpg UK" (miles per gallon UK).
The active calculation phase occurs when the engine
is running even if the motorcycle is stopped
(moments when the motorcycle is not moving and
the engine is OFF are not considered).
Fig. 16
40
To Next Page
Loading...
