ENGINE set-up
This function allows customising ENGINE power and
delivery.
To display the function, enter the setting menu and
access the "R.MODE" page. Then use buttons (1) and
(2) to select the riding mode to change and press
button (4).
Use buttons (1) and (2) to select ENGINE and press
button (4) to enter the settings.
Then, use buttons (1) and (2) to increase or decrease
the ENGINE level and press button (4) to confirm the
new level.
The possible settings are HIGH, MEDIUM and LOW.
Once the new setting is selected, press button (4).
The instrument panel automatically highlights the
"MEMORY" item; to actually save the new setting,
keep button (4) pressed for 3 seconds.
After 3 seconds, the instrument panel displays
"MEMORIZED" for 2 seconds to confirm that the new
setting is active. "EXIT" will be automatically
highlighted; press button (4) to quit and go back to the
setting menu.
Note
On the right side of the DEFAULT item, a
symbol indicates that the active settings are the
default ones, and so the parameters are those set by
Ducati.
82
To Next Page
Loading...
