Average speed
This function indicates vehicle average speed.
The calculation considers the distance and time since
Trip 1 was last reset. When Trip 1 is reset, the value
is reset and the first value available is displayed 10
seconds after the reset.
During the first 10 seconds, when the value is not yet
available, the display will show a string of dashes "-
-.-". The active calculation phase occurs when the
engine is running and the motorcycle is stopped
(moments when the motorcycle is not moving and
the engine is OFF are not considered).
The calculated value is then displayed increased by
5% to be aligned with vehicle speed indication.
Fig. 18
42
To Next Page