Setting menu
This menu is used to set/enable some motorcycle
functions.
To enter the Setting menu, keep button (2) pressed
for two seconds: once inside this menu it is no longer
possible to scroll among the functions on the
segment display.
Important
For safety reasons, the setting menu can be
accessed only when vehicle speed is below or equal
to 20 Km/h; if this menu is accessed and vehicle
speed is above 20 Km/h, instrument panel will
automatically quit it and shift back to "main" screen.
Setting menu items are the following:
- riding mode customisation (R.MODE);
- instrument panel backlighting regulation function
(B.LIGHT);
- LAP (LAP time activation and displaying);
- PIN CODE activation and modification (PIN);
- clock setting (CLOCK);
- setting the unit of measurement (UNITS);
- battery voltage indication (BATT.);
- engine rpm indication (RPM);
- error indication, active only if one or more errors
are active (ERRORS);
- EXIT.
To quit the setting menu, highlight "EXIT" with button
(1) or button (2) and press button (4).
72
To Next Page
Loading...
