Once the desired riding mode is selected, by pressing
button (4) for 3 seconds, the instrument panel checks
the throttle position and the front and rear brake
pressure:
- if throttle control is "closed" and brakes are
released or vehicle is stopped, the instrument
panel confirms the selected riding mode (*) and
goes back to standard page displaying;
- if throttle control is "open" or if brakes are
operated and vehicle is moving, the instrument
panel shows "CLOSE THROTTLE AND RELEASE
BRAKES" on the display and, only after all
conditions are met (closed throttle control and
brakes released or vehicle stopped) the
instrument panel confirms the selected riding
mode (*) and goes back to standard page
displaying.
Note
(*) If an on/off or off/on change of the ABS
system is associated to the Riding mode change,
when the selected riding mode is confirmed, the
instrument panel also starts the "procedure to enable/
disable the ABS".
Fig. 33
If the throttle control is not closed and brakes are not
released or vehicle is not stopped within the first 5
seconds after "CLOSE THROTTLE AND RELEASE
BRAKES" indication is shown, the Riding Mode
selection procedure is not performed and the
instrument panel goes back to standard page without
changing any settings.
64
To Next Page
Loading...
