Note
The MAX stored speed is reached during lap
(increased by 5%).
Note
If the MAX speed reading exceeds 299 Km/h
(186 mph) while the information is stored, the speed
that was reached is still displayed (example: 316 Km/
h).
Note
If there is no reading in the memory, the 30
times are shown, with the display showing 0’00’’00,
MAX rpm = 0 (zero) and MAX speed = 0 (zero).
Note
If while recording the LAP the engine reaches
the threshold that precedes the rev limiter or rev
limiter threshold, the relevant light Over Rev will turn
on when displaying the stored times.
Fig. 50
95
To Next Page
Loading...
